Denon SC-F109 Speaker
139,00 €
Denon SC-F109 is a compact passive speaker for a home audio system with a separate amplifier. A 12 cm D.D.L. driver reproduces the mid and low frequencies, while a 2.5 cm driver with a ventilation opening handles the high frequencies. The newly designed crossover is intended to provide smoother, more natural sound. Cross-bracing reduces cabinet vibrations.
Denon SC-F109 speaker is a compact passive model for a home audio system. It uses a 12 cm D.D.L. mid/bass driver, while a 2.5 cm driver with a ventilation opening reproduces the high frequencies. The internal crossover has been designed to deliver a smoother, more natural sound.
Who This Model Is For
This compact speaker is intended for a system with a separate amplifier. Its cabinet can be placed on suitable furniture, a speaker stand, or another stable surface. The amplifier is required to amplify the source signal and control the listening volume.
The mid/bass driver and high-frequency driver divide the reproduced frequency range between them. This construction allows each driver to operate within its designated part of the range.
Acoustic Construction
The newly designed crossover distributes the signal between the integrated drivers. Its purpose is to combine their respective frequency ranges into a smoother and more natural overall presentation.
Cross-bracing inside the cabinet reduces cabinet vibrations. This helps the enclosure remain more stable during music playback. The internal acoustic construction was developed using European audio reproduction engineering expertise.
Connecting the Speaker to an Audio System
This is a passive speaker, so it must be connected to the speaker output of an amplifier. A speaker cable is used for the connection. The speaker will not work without an amplifier if a phone, music player, or another line-level source is connected directly to it.
When connecting the speaker, observe the marked polarity. Reversed connections can affect sound reproduction, particularly when the speaker forms part of a larger audio system. It is best to switch off the amplifier before connecting the cable.
Setting Up the Sound
Volume and tone are adjusted through the connected amplifier. Begin with neutral tone settings. First refine the speaker’s position, and only then make adjustments to the bass or treble controls.
Place the speaker at a suitable distance from your normal listening position. Turning it slightly towards the listener may change how the high frequencies are perceived. Choose the final angle according to the position from which you usually listen.
Placement in the Room
Ideally, the high-frequency driver should be positioned approximately at ear level. This makes it easier for the direct high-frequency signal to reach the listener. Suitable furniture, a speaker stand, or another stable surface can help you achieve the appropriate height.
The distance from the rear wall affects the amount of bass you hear. Moving the speaker closer to the wall will generally increase the bass, although the sound may become less precise. Begin with your chosen distance and then adjust the position while listening to a familiar recording.
Do not place the speaker in a confined corner without considering how this changes the sound. A room corner can reinforce certain frequencies, so determine the most suitable location by listening carefully.
Cabinet Finishes
An earlier version of the store description mentions black and dark red cabinet finishes. Check the individual product offer to confirm the specific variant currently listed.
Technical Specifications
| Model | Denon SC-F109 |
|---|---|
| Type | Compact passive speaker |
| Mid/bass driver | 12 cm D.D.L. |
| High-frequency driver | 2.5 cm, with ventilation opening |
| Crossover | Newly designed for smoother, more natural sound |
| Cabinet bracing | Cross-bracing that reduces vibrations |
| Internal acoustic construction | Developed using European audio reproduction engineering expertise |
| Finishes | An earlier store description mentions black and dark red; check the product offer for the specific variant |
FAQ
Can the speaker be connected directly to a phone or television?
Not directly. This passive model requires an amplifier that receives the source signal and sends an amplified signal to the speaker.
How do I connect the speaker to an amplifier?
Use the amplifier’s speaker output and a speaker cable. Observe the marked polarity and switch off the amplifier before connecting the cable.
Where is the best place to position it?
Place it on a stable surface at a suitable distance from the listening position. The high-frequency driver should be approximately at ear level.
How can I adjust the amount of bass?
Start by changing the distance from the rear wall. Once you have found a suitable position, use the amplifier’s tone controls if they are available.
Which cabinet finishes are mentioned?
An earlier store description mentions black and dark red finishes. Check the individual product offer to confirm the specific variant currently available.
