Pioneer MVH-190UB Car Stereo
64,00 €
The Pioneer MVH-190UB is a digital car stereo for drivers who listen to music from USB, AUX or the radio. It plays FLAC and MP3 files. Its single RCA output can be assigned to either the rear speakers or a subwoofer. The shallow chassis leaves more room for connections, while the detachable faceplate makes the unit more convenient to use.
The Pioneer MVH-190UB car stereo is a digital media receiver designed for listening to music from USB devices, AUX sources and the radio. It plays FLAC and MP3 files. A detachable faceplate, shallow chassis and front AUX input make everyday use and installation more convenient.
Who This Receiver Is For
This model suits drivers who keep their music on USB storage or connect an external audio source. It has no disc mechanism, so playback is centred on digital files, a connected phone and radio.
The stated maximum output of the MOSFET amplifier is 50 W × 4. This is a maximum power rating, not continuous RMS power, and should not be compared directly with amplifiers rated under RMS measurement conditions.
Connecting Music Sources
The USB input supports music playback and charging of the connected device. FLAC is suitable for losslessly compressed audio, while MP3 works well for everyday music collections.
The illuminated front AUX input is easier to locate in a dark cabin. It can be used with an external player or a phone that has an analogue audio output. The required cable is not confirmed as part of the supplied package.
One RCA pre-out can be configured for either the rear speakers or a subwoofer. It is a shared output rather than two separate outputs, so choose the system configuration before adjusting the filters.
Sound Adjustment
A five-band graphic equaliser lets you adjust individual frequency ranges to suit the vehicle interior. Source level adjustment helps reduce changes in volume when switching between USB, AUX and radio.
The high-pass filter limits low frequencies sent to the main speakers. The low-pass filter is used to tune the subwoofer channel. Begin with a neutral equaliser setting, then adjust the filters while listening from your normal driving position.
Advanced Sound Retriever is intended to improve the playback of compressed music files. Direct subwoofer control provides another option when configuring the vehicle’s audio system.
Display and Controls
The wide-viewing-angle VA LCD shows a single line of up to 13 characters and supports Cyrillic characters. Ten brightness levels allow the display to be adjusted for daytime and night-time conditions.
The display also includes illumination effects. An illumination timer controls how long the lighting remains active.
Radio Functions
The RDS AM/FM tuner provides 24 station presets. Favourite stations can be stored and accessed later without running another search.
Frequencies can be selected using automatic or manual tuning. Manual tuning is useful when you want to choose a specific frequency yourself.
Phone Control and Compatibility
ARC control, app playback, music playback and direct phone audio were designed for phones running Android 4.1 or later. These are capabilities associated with the original generation of this model. Compatibility with current phones and continued availability of the app are not guaranteed.
Installation and Detachable Faceplate
The shallow chassis leaves more room for cables and connectors behind the receiver. The fully detachable faceplate can be removed and taken out of the vehicle.
A protective case was intended for the faceplate, but its inclusion in the package has not been confirmed. Before installation, decide how the shared RCA output will be used and plan the cable routing.
Technical Specifications
| Type | Digital media receiver for vehicles |
|---|---|
| Chassis | Shallow |
| Display | Wide-viewing-angle VA LCD |
| Display information | One 13-character line |
| Brightness | 10 adjustment levels |
| Characters | Cyrillic supported |
| Illumination | Effects and timer |
| USB input | Music playback and battery charging |
| USB formats | FLAC and MP3 |
| AUX input | Illuminated and located on the front panel |
| RCA pre-out | One, configurable for rear speakers or a subwoofer |
| Sound adjustment | Five-band graphic equaliser and source level adjustment |
| Filters | High-pass and low-pass |
| Additional audio functions | Compressed-file playback enhancement and direct subwoofer control |
| Amplifier | MOSFET, stated maximum output of 50 W × 4 |
| Radio | RDS AM/FM with 24 station presets |
| Radio tuning | Automatic and manual |
| Android functions | Original-generation support for Android 4.1 or later |
| Phone functions | ARC control, app and music playback, and direct audio playback |
| Faceplate | Fully detachable |
| Protective case | Intended for the faceplate; inclusion in the package is not confirmed |
FAQ
Does this model play CDs?
No. It is a digital media receiver without a disc mechanism. Music can be played from USB storage, an AUX source or AM/FM radio.
When should I use USB, and when should I use the AUX input?
Choose USB to play supported music files or charge a connected device. AUX is useful for connecting a source with an analogue audio output.
Which files can be played through USB?
The confirmed formats are FLAC and MP3. Choose FLAC for losslessly compressed audio files, while MP3 is suitable for ordinary music collections.
When should the RCA output be assigned to a subwoofer?
Use this setting when the system has a separate subwoofer channel. You can then apply the low-pass filter, but the shared output will no longer be available for the rear-speaker signal.
Will the ARC app work with a current phone?
Android 4.1 support describes the compatibility available for the original product generation. Current operating systems and app availability may no longer match those earlier conditions.
What should be planned before installation?
Choose the purpose of the RCA output and plan the cable placement. The shallow chassis provides additional room for connections behind the unit.
Related products
