TonTräger Reference Monitor 30 Speaker Stand
1 100,00 €
TonTräger Reference Monitor 30 is a solid-wood speaker stand designed for the M30.1 model. Extended connecting spikes receive resonances directly from the speaker cabinet, while the construction isolates the loudspeaker from the floor. The handcrafted stand contains no metal or plastic components. Its surface is treated in several stages with natural oils and pigments. It is supplied fully assembled, so no assembly from separate parts is required.
TonTräger Reference Monitor 30 is a solid-wood speaker stand designed for the M30.1 loudspeaker.
Purpose and compatibility
The available product information specifically identifies the M30.1 model. Compatibility with other Monitor 30 variants has not been confirmed. If you are considering this stand for another Monitor 30 version, its suitability should therefore not be treated as established.
This dedicated application also means that a similar model name does not by itself confirm compatibility. Use with any other variant would require separate confirmation, which is not included in the supplied information. The Reference Monitor 30 is consequently described as an M30.1 stand rather than a universal stand for the entire Monitor 30 family.
Resonance transfer and floor isolation
Extended connecting spikes are designed to receive resonances directly from the speaker cabinet. At the same time, the stand’s construction isolates the loudspeaker from the floor. These features address two related mechanical tasks: managing vibrations from the cabinet and limiting the speaker’s direct mechanical connection to the supporting surface.
This operating principle makes the stand more than a piece of furniture used simply to raise a loudspeaker. Its construction is intended to manage the specific mechanical relationship between the speaker cabinet and the floor.
Solid-wood construction
The stand is handcrafted in the TonTräger.audio workshop. TonTräger.audio products are also planned, developed and tested there. Carefully selected raw materials and solid wood are used in its construction.
The wood comes from local FSC-certified forests. Metal and plastic components are deliberately excluded from the design. Solid wood is therefore not merely a decorative outer finish: it is central to the construction principle of the stand as a whole.
Surface treatment
The wooden surface receives multiple coats. Natural oils and pigments are applied over several treatment stages, providing a finishing method suited to the stand’s solid-wood construction.
The available information does not specify a particular finish colour or list any finish options. A purchase decision should therefore not be based on an assumed shade. Only the multilayer treatment with natural oils and pigments is confirmed.
Delivery and preparation
The stand is supplied fully assembled. There is no need to connect separate structural parts or carry out assembly work before use. This is the only preparation detail confirmed by the available information, and it reduces the installation work required from the buyer.
No dimensions, weight, load capacity or additional package contents are specified in the supplied information. These details cannot be inferred from the product name or its intended application.
Technical specifications
| Product type | Solid-wood speaker stand |
|---|---|
| Designed for | M30.1 loudspeaker |
| Manufacture | Handcrafted construction |
| Development | Planned, developed and tested in the TonTräger.audio workshop |
| Main material | Carefully selected solid wood |
| Wood origin | Local FSC-certified forests |
| Resonance management | Extended spikes receive resonances directly from the speaker cabinet |
| Isolation | The construction isolates the loudspeaker from the floor |
| Surface | Multilayer coating of natural oils and pigments |
| Metal components | Not used |
| Plastic components | Not used |
| Preparation | Supplied fully assembled |
FAQ
Is this a loudspeaker or a speaker stand?
It is a stand designed for the M30.1 loudspeaker, not a loudspeaker.
Does the stand need to be assembled before use?
No. The stand is supplied fully assembled, so it does not need to be put together from separate parts.
Is the stand suitable for other Monitor 30 variants?
According to the available information, it is intended for the M30.1. Compatibility with other Monitor 30 variants has not been confirmed.
Are the stand’s dimensions, weight and load capacity specified?
No. These details are not established in the supplied information.
Can I choose a particular surface finish?
The available information does not confirm any choice of finishes.
Where is the stand made?
It is handcrafted in the TonTräger.audio workshop, where the products are also planned, developed and tested. The wood used is stated to come from local FSC-certified forests.
