Ricable Custom SK6 Isolation Spikes
11,00 €
Ricable Custom SK6 is an isolation-spike set for loudspeakers, active subwoofers and Hi-Fi electronic components with M6 mounting points. Four solid-metal spikes have individual locknuts for more precise levelling. The supplied support discs receive the pointed tips, while self-adhesive EVA felt pads help protect furniture and flooring.
Ricable Custom SK6 is a set of four chrome-finished M6 isolation spikes for loudspeakers and Hi-Fi electronic components. It is designed for equipment with M6 threaded mounting points. Adjustable locknuts allow the height of each spike to be set individually, helping you level the equipment on its supporting surface.
What is this set designed for?
These spikes are intended to provide vibration isolation between compatible loudspeakers or Hi-Fi electronics and the surface supporting them. Suggested applications include loudspeakers, active subwoofers, amplifiers and other electronic components equipped with suitable threaded mounting points.
One set supports a single item of equipment that uses four mounting points. Before ordering, check that the cabinet or chassis has four M6 threaded mounting points. The spikes cannot be installed in holes made for a different thread. No maximum permissible load is stated for this set, so suitability cannot be determined from the weight of the equipment alone.
Solid machined-metal construction
Each spike is machined from a solid piece of metal and given a chrome finish. Its pointed end rests in one of the supplied protective support discs. The discs are also machined from solid material and provide a defined contact point for the spike tips.
Height adjustment and installation
Each spike has its own height-adjustment locknut. Begin by screwing all four spikes into the threaded mounting points on the equipment. Adjust each spike separately until the cabinet or chassis stands level and remains stable on the supporting surface.
Once the correct position has been found, tighten each locknut against the equipment. This secures the selected spike height and helps prevent the adjustment from changing. Independent adjustment is particularly useful when a floor or furniture surface is not perfectly even.
Positioning the support discs
Place one protective support disc directly beneath the pointed end of each spike. Attach the self-adhesive side of an EVA felt pad to the underside of every disc. Before allowing the supports to carry the equipment fully, make sure that all four spike tips are correctly seated in the centres of their respective discs.
Package contents
The set includes four M6 spikes, each supplied with an adjustment locknut. It also contains four protective support discs and four self-adhesive EVA felt pads. These parts provide everything required for one compatible four-point installation; no additional supporting components are included or required for that arrangement.
Technical specifications
| Product type | Set of four isolation spikes |
|---|---|
| Applications | Loudspeakers, active subwoofers, amplifiers and other Hi-Fi electronic components |
| Thread | M6 |
| Spike material | Solid machined metal |
| Finish | Chrome |
| Height adjustment | Individual locknut on each spike |
| Supporting arrangement | Pointed tip with a separate protective support disc |
| Surface protection | Self-adhesive EVA felt pad beneath each support disc |
| Dimensions | 34.5 × 15 mm – stated by the manufacturer collectively for the spike and support disc; separate dimensions are not specified |
| Weight | 12 g per piece |
| Package contents | 4 M6 spikes with locknuts, 4 protective support discs and 4 EVA felt pads |
FAQ
Will these spikes fit my loudspeakers?
They fit loudspeakers with M6 threaded mounting points. If the cabinet uses a different thread, this set cannot be installed.
Is one set enough for two loudspeakers?
No. The package contains four spikes, so one set is sufficient for one loudspeaker or one electronic component that requires four supports.
How do I level a loudspeaker on an uneven surface?
Adjust the screw-in depth of each spike individually. Once the cabinet is level and stable, secure the settings by tightening the locknuts against it.
How can I protect flooring or furniture from the pointed spikes?
Seat the spike tips in the supplied protective support discs. Fit the self-adhesive EVA felt pads beneath the discs to help protect the supporting surface.
Can this set be installed beneath an amplifier?
Yes, provided that the amplifier chassis has compatible M6 mounting points. The same requirement applies to other Hi-Fi electronic components.
Is a maximum permissible load specified?
No. A maximum load for the set is not stated. The dimensions or weight of the spikes alone are not enough to determine the permissible weight of the supported equipment.
