Pioneer MVH-S330DAB Car Stereo
145,00 €
The Pioneer MVH-S330DAB is a 1-DIN car audio receiver for drivers who want DAB/DAB+ radio and music from a phone in one unit. Bluetooth provides hands-free calling and wireless music streaming. A large rotary control and physical station buttons give direct access to the main functions from the front panel. The receiver also plays FLAC files and has one RCA pre-out.
The Pioneer MVH-S330DAB car stereo is a 1-DIN in-car audio receiver designed for radio, phone calls and music from a smartphone. It features Bluetooth, a built-in DAB/DAB+ tuner and FLAC playback. A large rotary control and physical station buttons provide direct access to the main functions from the front panel.
Who is this receiver for?
This model is intended for vehicles with a 1-DIN installation slot. It combines digital radio reception, hands-free calling and music streaming from a phone in a single dashboard-mounted unit.
The Bluetooth connection supports hands-free calls and wireless music streaming from a smartphone. This allows you to listen to content selected on your phone without using a separate wired audio connection.
Audio sources and connections
The built-in DAB/DAB+ tuner is designed to receive digital radio stations. Favourite stations can be saved and selected later using the physical preset buttons.
FLAC playback is useful for anyone with a music library in this format. There is no need to convert these files to another compressed audio format before listening.
One RCA pre-out is provided for sending an audio signal to an external amplifier. This is useful when expanding the vehicle’s audio system. As there is only one output, a system requiring several separately controlled external signal paths will need additional planning.
Controls and initial setup
The large rotary control is used to operate the receiver’s main functions. Separate station buttons let you return to a saved radio service without searching for it again.
The 2-band graphic equaliser allows adjustment of two audio-frequency ranges. Begin with neutral settings and change each band in small steps. Assess the final result from your normal driving position while listening to a recording you know well.
Installation space and system planning
The 1-DIN designation describes the dashboard space required for installation. It does not specify the plugs or trim frame needed for a particular vehicle. Before installation, check the vehicle’s dashboard opening and the arrangement of its existing connections.
If you plan to use an external amplifier, decide in advance how the single RCA output will be used. If a separate amplifier is not required, the receiver’s built-in MOSFET amplifier can be used to power the audio system.
How should the amplifier power rating be interpreted?
The stated output of the built-in amplifier is 50 W × 4. No measurement conditions are supplied for this figure, so it should not be treated as a continuous RMS power rating. When comparing this receiver with another stereo or amplifier, use power figures measured under equivalent conditions.
Technical specifications
| Model | Pioneer MVH-S330DAB |
|---|---|
| Device type | Car audio receiver |
| Installation format | 1-DIN |
| Wireless connectivity | Bluetooth |
| Phone functions | Hands-free calling and wireless music streaming |
| Radio tuner | Built-in DAB/DAB+ |
| File playback | FLAC |
| Main control | Large rotary control |
| Radio controls | Physical buttons for saving and selecting stations |
| Equaliser | 2-band graphic equaliser |
| Pre-out | 1 RCA output |
| Built-in amplifier | MOSFET |
| Stated amplifier output | 50 W × 4, with no measurement conditions supplied; not to be treated as an RMS rating |
FAQ
Who is this car stereo best suited to?
It is suitable for drivers looking for a 1-DIN receiver that combines digital radio, phone calls and wireless music streaming. FLAC playback is an additional benefit for anyone who owns recordings in this format.
Can it be used without an external amplifier?
Yes. The unit has a built-in MOSFET amplifier. Its stated output is not presented as a measured continuous RMS power rating.
Can an external amplifier be connected?
Yes. One RCA pre-out is provided for this purpose. Before installation, decide which part of the system it will serve, as there are no additional separate RCA outputs.
How much sound adjustment does the equaliser provide?
The 2-band graphic equaliser allows two audio-frequency ranges to be adjusted.
How much installation space is required?
A 1-DIN slot is required in the vehicle’s dashboard. The vehicle-specific connections and trim solution must also be suitable for the planned installation.
