Pioneer MVH-S120UBG Car Digital Media Receiver
79,00 €
The Pioneer MVH-S120UBG is a car digital media receiver for drivers who play music from a phone or another device connected by cable. The front USB input supports music playback and can charge the battery of a compatible device. The AUX input is intended for an analogue audio source. Direct Android connectivity is specified for versions 5.0-7.1.2 with AOA 2.0 support.
The Pioneer MVH-S120UBG is a short-chassis car digital media receiver designed for playing music from devices connected by cable. Its front-mounted USB and AUX inputs let you connect a source without removing or reaching behind the dashboard.
This model is suitable for drivers who keep their music on a compatible phone or another external device. The functions described here cover music playback through USB or AUX.
Wired connections for everyday listening
Use the USB input to connect a compatible Android phone. While you listen to stored tracks, the connected device’s battery can also be charged. A single connection can therefore handle both music playback and power.
The AUX input is intended for a device with an analogue audio output. It carries the audio signal but does not charge the device’s battery. Other music sources can be connected through USB or AUX, depending on the connections available on the source device.
When using an AUX source, begin with its volume set to a moderate level. If the signal is too quiet, increase the source volume gradually. Reduce it if you hear distortion.
Connecting an Android phone
Direct connectivity is specified for Android 5.0-7.1.2. The phone must also support the AOA 2.0 protocol. A newer operating-system version falls outside the stated support range.
Check the compatibility of your particular phone before purchasing, especially if it runs a version newer than Android 7.1.2. The supplied information does not establish compatibility with current phones or operating systems.
Expanding the audio system
The built-in MOSFET amplifier has four channels with a stated power rating of 50 W × 4. No measurement conditions are provided, so this figure should not be treated as an RMS or continuous-power rating.
One RCA line output is located at the rear. It provides a low-level signal for an additional amplifier. A passive speaker or passive subwoofer cannot be connected directly to this output because the RCA connection does not provide the amplified power required to drive it.
If you plan to add an external amplifier, check system compatibility against the amplifier’s available inputs.
Short chassis and installation space
The short chassis requires less depth behind the dashboard. This leaves more room for the rear connection and for the RCA cable to bend without being forced into a tight space.
During installation, avoid placing strain on the rear connection or sharply bending the attached cable. The front USB and AUX sockets should remain easy to reach from the driver’s position.
Technical specifications
| Model | Pioneer MVH-S120UBG |
|---|---|
| Device type | Car digital media receiver |
| Chassis | Short chassis |
| Front inputs | USB and AUX |
| Android versions | 5.0-7.1.2 |
| Phone requirement | AOA 2.0 support |
| USB function | Music playback and charging of the connected device’s battery |
| Built-in amplifier | MOSFET, 50 W × 4; power measurement conditions not specified |
| Rear output | 1 RCA line output |
FAQ
Which input should I use for a phone?
Choose USB for a compatible Android phone when you need both music playback and charging. AUX is suitable for a source equipped with an analogue audio output.
Can I connect a phone running a newer Android version?
Direct support is specified only for versions 5.0-7.1.2 and for phones supporting AOA 2.0. Newer versions are not included in this stated range.
Can the RCA output power a passive speaker?
No. The RCA output carries a line-level audio signal. A passive speaker or subwoofer requires a suitable amplifier.
What does the 50 W × 4 power rating mean?
It is the stated rating for the four channels of the built-in MOSFET amplifier. Because no measurement conditions are given, it cannot be compared directly with RMS ratings.
What is the benefit of the short chassis?
It reduces the installation depth required behind the receiver. This leaves more room inside the dashboard for the rear connection and the bend of the attached cable.
