KEF Reference 2c Series Grille – Protective Speaker Grille
100,00 €
KEF Reference 2c Series Grille is a protective grille accessory for the Reference 2c series speaker. The design provides a separate grille for each speaker driver, although the quantity supplied must be checked in the package information. The magnetic mounting system makes fitting and removal easier. No signal or power connection is required.
KEF Reference 2c Series Grille is a protective speaker grille accessory designed for the Reference 2c series. Its design provides a separate grille for each individual speaker driver. An easy-to-use magnetic mounting system makes the grilles straightforward to fit and remove. This is a speaker accessory, not a standalone audio system component.
Individual grille design for each driver
These grilles are not designed as a single full-width front panel. Instead, each speaker driver has its own grille, which fits into the corresponding position on the front of the speaker. This describes the product’s construction but does not confirm the quantity supplied. Check the specific package contents before placing your order.
Selection and compatibility
Check the complete model designation of your speaker before purchasing, as these grilles are not universal. A general KEF or Reference name alone is not enough to establish compatibility. The shape and arrangement of the grilles are intended for the KEF Reference 2c, so this accessory should not be selected solely by comparing approximate speaker dimensions.
If the model designation includes an additional version or revision, compare the full designation with the product information. The available information does not confirm compatibility with every Reference 2c revision. If the designation is unclear, verify compatibility before purchasing.
Magnetic attachment and positioning
Each grille is held in place magnetically. Position it over the intended driver location on the front of the speaker and allow the magnets to draw it into place. If the grille sits at an angle, lift it away and realign it. Do not slide it across the speaker surface or force it into position.
Hold the grille by its edges during installation and avoid pressing the surface of the speaker driver. Before fitting it, inspect the front of the speaker, identify the correct position and bring the grille towards it in a straight line. If it does not settle into the intended location, check its orientation and the speaker’s full model designation again.
Connections and controls
This accessory has no electrical connections, controls or independent sound adjustment. There is no signal or power connection to select, no amplifier setting to change and no need to pair the grille with an audio source. The speaker’s existing connection to the amplifier remains unchanged because the grille attaches mechanically.
When selecting this accessory for different audio systems, connection type is not a relevant criterion. The important considerations are the speaker model and the grille’s physical compatibility. Amplifier power, speaker impedance and the audio source being used do not determine whether this accessory will fit a particular speaker.
Everyday use
The grille can be removed without disconnecting the speaker from the system. When replacing it, first align it with the intended position and only then bring it close to the speaker. If the magnets do not hold it in the correct position, do not press harder. Recheck the alignment, orientation and model compatibility.
Technical specifications
| Manufacturer | KEF |
|---|---|
| Model | Reference 2c Series Grille |
| Product type | Protective speaker grille accessory |
| Intended for | KEF Reference 2c series speaker |
| Construction | A separate grille is provided for each speaker driver position |
| Attachment | Easy-to-use magnetic mounting system |
FAQ
Are these grilles universal?
No. They are intended for the KEF Reference 2c model. Check the speaker’s complete model designation before purchasing.
Is the quantity of grilles supplied specified?
No. The design uses a separate grille for each individual driver, but the available information does not confirm the exact package contents. Check the quantity supplied before ordering.
Are the speaker’s dimensions enough to confirm compatibility?
No. This is a model-specific accessory, so the complete Reference 2c model designation is more important than approximate dimensions alone.
What should I check if the model designation includes a revision?
Compare the complete model and revision designation with the product information. If the specific revision is not listed, confirm compatibility before purchasing.
What should I do if the grille does not fit properly?
Do not force it into place. Check its position and orientation, as well as the speaker’s complete model designation. A poor fit may indicate incorrect alignment or an incompatible variant.
