KEF Reference 1 Series Grille
130,00 €
KEF Reference 1 Series Grille is a set of protective grilles for Reference 1 Series speakers. A separate piece is used for each driver, so this is not a single full-size front panel. The magnetic mounting system allows the grilles to be fitted easily in their designated positions. This mechanical accessory requires no cables, electrical connections or audio-system adjustments.
KEF Reference 1 Series Grille is an accessory designed specifically for KEF Reference 1 Series speakers. It consists of separate protective grilles for the individual speaker drivers rather than a single panel covering the entire front of the cabinet. A magnetic mounting system makes installation straightforward, with no cables or electrical connections required.
These grilles are intended for owners of Reference 1 Series speakers who need the grille design made for the original construction. Compatibility with other KEF Reference models is not intended.
Separate grille for each driver
Each speaker driver has its own separate grille. This arrangement differs from a conventional full-size grille that covers the entire front panel of a speaker.
The individual pieces are fitted over their corresponding driver positions. Before installation, identify where each grille belongs. This helps prevent incorrect placement and avoids unnecessary pressure while fitting the pieces.
This design is also important when deciding whether the product meets your needs. If you are looking for one complete front panel, this is a different type of construction. The Reference 1 Series Grille uses individual covers for the separate drivers.
Magnetic mounting
The magnetic mounting system holds each grille in its designated position on the speaker. There is no need to connect the grilles to an amplifier, receiver or any other part of the audio system.
During installation, hold each grille parallel to the front of the speaker. As it approaches the correct position, the magnets help guide it into place. Do not force the piece or press it onto a different area of the cabinet.
After installation, inspect every grille separately. Each piece should sit neatly in its intended location without overlapping an adjacent component. To remove a grille, carefully pull it away from its magnetic mounting points.
Use within an audio system
This is a mechanical speaker accessory, so it does not change the amplifier connection or the way the system is controlled. Installing the grilles does not require adjustments to volume, frequency reproduction or other audio-system settings.
The speakers do not need to be repositioned simply because the grilles are being installed. The main requirement is convenient access to the front of each cabinet. This allows every piece to be aligned directly with its intended position without touching the neighbouring drivers.
Check the exact speaker model before choosing this accessory. The product is made for the KEF Reference 1 Series; the KEF brand name or the broader Reference family name alone is not enough to confirm suitability.
Technical specifications
| Product type | Separate protective speaker grilles |
|---|---|
| Intended for | KEF Reference 1 Series speakers |
| Construction | Separate grille for each speaker driver |
| Mounting | Magnetic mounting system |
FAQ
What are these protective grilles designed for?
They are designed for KEF Reference 1 Series speakers. This is a model-specific accessory rather than a universal speaker grille.
Is this one complete front grille?
No. Each speaker driver has its own separate grille. The entire front of the cabinet is not covered by one shared panel.
How are the grilles attached?
They are held in place magnetically. Position each piece over the corresponding driver location and allow the magnets to draw it into place.
Are cables or audio-system adjustments required for installation?
No. The grilles have no electrical connections or controls. Installing them does not alter the amplifier, source equipment or speaker-cable connections.
Do these grilles fit other KEF Reference models?
This product is intended for Reference 1 Series speakers. It should not be selected for another Reference model solely because the series names are similar.
What should I check before buying?
Confirm that you need separate magnetic grilles for KEF Reference 1 Series speakers. This product is neither a full front panel nor a universal KEF accessory.
