Epos Speaker Stand for the Epos ES14N
800,00 €
Epos Speaker Stand is a dedicated speaker stand for the Epos ES14N. Four bonded layers of wood form the central support, while damping adhesive helps manage mechanical vibration. The top plate places a bitumen layer between two layers of steel. A thick steel base is designed to accommodate adjustable spikes. The stand is an optional accessory, as the ES14N can also be used with an alternative support approximately 55 cm high.
Epos Speaker Stand is a dedicated support designed for the Epos ES14N speaker. Its central section consists of four bonded layers of wood. The top uses a double steel plate with an intermediate bitumen layer, while the thick steel base is designed to accommodate adjustable spikes.
This stand is an optional ES14N accessory rather than a required part of the speaker package. It is intended for buyers who want a support developed specifically for this speaker and a carefully selected combination of materials.
Layered central support
The central section of the stand is made by bonding four layers of wood. The layers are joined with damping adhesive of the same type used inside the ES14N speaker. This construction forms the separate wooden layers into a unified support and helps manage mechanical vibration.
This is an important distinction when comparing speaker stands by construction. The central support is not simply a hollow metal tube. Instead, its structure is based on bonded wooden layers with damping material between them.
Steel support plates
The top plate consists of two layers of steel. A bitumen layer is placed between them to provide additional mechanical damping. The ES14N speaker rests on this part of the stand.
The bottom plate is made from thick steel and forms the base of the stand. It is designed for adjustable spikes. When spikes are selected for a particular installation, they allow the position of the support to be adjusted.
When adjusting the spikes, level the stand before placing the speaker on it. Once adjustment is complete, check stability by gently pressing different edges of the top plate. The stand should not rock.
Positioning in the listening room
Both stands in a stereo system should be set to the same height and placed on similar supporting surfaces. This helps keep both speakers positioned consistently in relation to the listening area. Choose the final angle of the ES14N speakers and their distance from the walls according to the acoustics of the room.
Spikes used on hard flooring may damage the surface, so separate protective discs may be required beneath them. These protective discs are not specified as part of the stand package.
Leave enough slack in the speaker cable. A taut cable should not pull on the speaker or affect the position of the stand. It is also sensible to keep the cable clear of the adjustable support points.
Dedicated or alternative stand
The ES14N speaker may be supplied without this stand. The system can therefore also be assembled using another support approximately 55 cm high. This measurement applies to the selection of an alternative stand and is not the stated height specification of this model.
When choosing another support, consider the dimensions of its top plate, its stability and the resulting position of the speaker. The dedicated stand is distinguished by its intended use with the ES14N and by its combination of wood, steel and bitumen.
Technical specifications
| Product type | Dedicated speaker stand |
|---|---|
| Designed for | Epos ES14N speaker |
| Central section | Four bonded layers of wood |
| Central-section adhesive | Damping adhesive also used inside the ES14N |
| Top plate | Two layers of steel |
| Top-plate damping | Bitumen layer between the steel layers |
| Bottom plate | Thick steel |
| Support adjustment | Bottom plate designed for adjustable spikes |
| Alternative | The ES14N can be used with another stand approximately 55 cm high |
FAQ
Is this stand required for the Epos ES14N speaker?
No. The ES14N may be supplied without the dedicated stand. Another support approximately 55 cm high can also be selected.
How does the dedicated stand differ from a conventional metal stand?
Its central section consists of four wooden layers joined with damping adhesive. The top plate combines steel with an intermediate bitumen layer.
Can the stand be levelled on an uneven floor?
The bottom plate is designed to accommodate adjustable spikes. If spikes are used, they can correct the position of the stand and eliminate rocking.
Are adjustable spikes included?
The bottom plate provides for their use. It has not been confirmed that the spikes are included in the package.
How should I choose a position for the stand?
Place it on a stable surface and level it before setting the speaker on top. The supports for both stereo channels should be at the same height.
What should I consider when choosing an alternative stand?
Look for a support approximately 55 cm high. Consider its stability, the size of its top plate and whether it positions the ES14N appropriately.
Related products
