Audiovector R 3 Arreté Floorstanding Speaker

Audiovector R 3 Arreté is a compact 2.5-way floorstanding speaker designed for a home audio system. It uses 6.5-inch Carbon bass and midrange drivers, while an R AMT Arreté driver reproduces the high frequencies. Its nominal 8-ohm impedance and 90.5 dB sensitivity provide useful guidance when matching the speaker with an amplifier.

Drivers and bass system

The drivers are designed by Audiovector and manufactured in Denmark. The R AMT Arreté Air Motion Transformer high-frequency driver is handmade.

Bass reproduction is supported by a downward-firing bass reflex system. An unobstructed air gap must therefore be maintained beneath the speaker. A thick carpet or soft supporting surface may alter the operating conditions around the port.

Cabinet construction

The cabinet features non-parallel surfaces and internal shock absorbers. It also incorporates NCS Freeze and No Energy Storage technologies.

The 103.4 cm-tall cabinet occupies 23 × 36 cm of floor space. Before purchasing, consider the available distance from walls and furniture. The speakers should not obstruct a walkway or be pressed tightly against a cabinet or other piece of furniture.

Amplifier selection and connection

The speaker connects to an amplifier’s speaker outputs using a suitable speaker cable. The main figures to consider when choosing an amplifier are the nominal 8-ohm impedance and 90.5 dB sensitivity. The power rating is stated as 350, but neither its unit nor the measurement conditions are specified.

The Arreté version includes the Freedom Grounding system. The separate Freedom Grounding cable required to use this system is not included. This cable should not be confused with the speaker cable that carries the audio signal from the amplifier.

Placement and initial setup

Begin by positioning both speakers at an equal distance from the listening position. Leave open space around each cabinet and make sure that the downward-firing bass reflex port remains unobstructed. You can then adjust the distance from the rear wall in small increments.

Placing the speakers closer to a wall will generally make the bass more prominent. Moving them farther into the room may reduce the amount of bass. Choose the final position by listening to both channels from your usual seating position.

Finishes and included accessories

The standard finishes are White Silk, Black Stained Ash, Italian Walnut and African Rosewood. Custom high-gloss piano finishes are available to order. Black fabric grilles are included, allowing the speakers to be used with either an open or covered front.

Technical specifications

Type	Compact floorstanding speaker
Operating principle	2.5-way
Bass system	Downward-firing bass reflex system
Bass and midrange drivers	6.5-inch Carbon
High-frequency driver	R AMT Arreté
Frequency range	23-53 kHz at -6 dB; the unit for the lower limit is unclear
Sensitivity	90.5 dB under an 8-ohm condition
Nominal impedance	8 ohms
Power rating	350; unit and measurement conditions not specified
Crossover frequencies	320 and 2900; measurement unit not specified
Freedom Grounding	Included; cable not supplied
NCS Freeze technology	Included
No Energy Storage technology	Included
Internal shock absorbers	Included
Cabinet surfaces	Non-parallel
Dimensions	103.4 × 23 × 36 cm
Standard finishes	White Silk, Black Stained Ash, Italian Walnut, African Rosewood
Made-to-order finish	Custom high-gloss piano colours
Grilles	Black fabric grilles included

FAQ

What is this speaker designed for?

It is designed for a home audio system that uses a separate amplifier. Its compact floorstanding cabinet suits listeners looking for a full-height speaker.

How do I connect it to a stereo or AV amplifier?

Use the amplifier’s speaker outputs and a speaker cable. When matching the equipment, take the nominal 8-ohm impedance and 90.5 dB sensitivity into account.

Where should I begin when experimenting with placement?

Place both speakers at an equal distance from the listening position. Keep the lower bass reflex port unobstructed and adjust the position in small increments.