Qln Prestige Stand Speaker Stand

Qln Prestige Stand speaker stand is a mechanical support designed for the Qln One and Qln Prestige One bookshelf speakers. It can also be used as a general-purpose stand for other speakers. Its replaceable top plate allows a compatible speaker to be attached directly to the stand.

Direct attachment is intended to provide greater stability and improve sound performance. When the product is used as a general-purpose stand, the speaker remains a separate unit resting on the upper support. Direct mounting is not specified for other speaker models.

Who this speaker stand is for

This model is intended for listeners who want a more stable support for a compatible Qln bookshelf speaker. It is particularly useful when placing the speaker on ordinary furniture does not provide the positioning or stability required. A separate stand lets you choose the speaker position according to the listening seat rather than being restricted by the location and dimensions of existing furniture.

The stand can also serve as a general-purpose speaker support. This flexibility may be useful if the speakers are changed or the stands are moved to another audio system. In that situation, pay close attention to the speaker’s base, the position of its centre of gravity and the way it rests on the top plate. The speaker must remain secure without rocking or sitting in an unbalanced position.

How direct mounting works

When installing a compatible speaker, the speaker’s bottom plate is used in place of the stand’s standard top plate. This connects the speaker to the stand instead of simply placing it on a separate supporting surface. The purpose of this arrangement is to reduce free movement between the speaker and its support.

Direct mounting also helps the speaker remain in a consistent position. This matters when adjusting its angle towards the listening seat. If a freestanding speaker is moved accidentally, the direction selected during setup can change. The mechanical connection helps preserve that position after the speaker has been aligned.

Using the stand with other speakers

When the stand is used with another speaker model, the speaker’s base must rest securely on the top plate. The supported area must be sufficient to carry the speaker without instability, and the speaker’s centre of gravity should not sit close to the edge of the plate.

General-purpose use does not mean direct compatibility with every speaker. The dedicated mounting arrangement is intended only for the specified Qln models. With other speakers, the product functions as a conventional separate stand, and the speaker is placed on its upper support rather than mechanically attached through the model-specific system.

Positioning in the listening room

Place the stand on a firm, level surface. Before adding the speaker, check that the support does not rock. Choose the final location while considering the combined height of the stand and speaker. Ideally, the tweeter should be positioned as close as practical to the listener’s ear level.

When two stands are used in a stereo system, place them under equivalent conditions wherever possible. Differences in flooring or unequal distances from nearby walls can affect the result from each channel. Aim the speakers symmetrically and fine-tune their toe-in while listening from the main seating position.

The appropriate distance from the rear and side walls depends on the speaker used on the stand. Once the speaker’s height or position changes, a layout that worked previously may no longer be suitable. After installation, listen to familiar recordings and adjust the distance and angle in small steps. This makes it easier to judge each change without losing track of the previous setup.

Integration with the audio system

The stand has no signal connection and is not connected to an amplifier. Speaker cables run directly to the speaker placed on the stand. Choosing this stand therefore does not alter the amplifier power requirements, speaker impedance considerations or connection requirements of the audio system.

In a stereo system, separate stands make it possible to position the left and right channels independently of the furniture. In a home cinema system, the product continues to perform a purely mechanical role. The speaker’s function within the system and the way it is connected are determined by the audio-system layout itself.

When planning the cable route, do not leave cables pulled tight around the stand. A cable should not tug on the speaker or alter its direction. Leaving enough slack allows the speaker angle to be adjusted without placing strain on the connections.

Technical specifications

FAQ

Can the stand be used with speakers from other manufacturers?

It can be used as a general-purpose stand. The speaker must rest securely on the top plate. The dedicated direct-mounting arrangement is not specified for models from other manufacturers.

Is the speaker simply placed on the top plate?

For general-purpose use, the speaker is placed on the stand. With compatible models, the top plate can be replaced by the speaker’s bottom plate so that the speaker can be attached directly.

Does the stand need to be connected to an amplifier?

No. It is a mechanical speaker support with no audio-signal connections. The amplifier and speaker cables connect to the speaker itself.

Is it suitable for stereo and home cinema systems?

The stand can be used in any system where the selected speaker is placed on a separate support. Electrical compatibility is determined by the speaker and amplifier, not by the stand.

How should I choose the right position in the room?

Start with a firm, level surface. Consider the tweeter height, the speaker’s distance from the walls and the direction in which it faces relative to the listening position.

What are the benefits of attaching the speaker directly?

The attachment is intended to increase stability and maintain a consistent speaker position. This mounting arrangement is also designed to improve sound performance.

What should I check when using the stand with another speaker model?

Check how the speaker’s base rests on the support and consider the position of its centre of gravity. The speaker must not rock, and its base should not project dangerously beyond the edges of the support.