Audiovector R 1 Avantgarde Loudspeaker

Audiovector R 1 Avantgarde is a two-way stand-mount loudspeaker designed for a home audio system. Its cabinet features a rear bass-reflex port and a 6.5-inch carbon-fibre bass/midrange driver. Its compact dimensions make it suitable for rooms where there is not enough space for floorstanding speakers.

Who is this loudspeaker for?

This model is intended for buyers seeking stand-mount loudspeakers for a system with a separate amplifier. The 8 Ω nominal impedance is the most important starting point when choosing an amplifier. The stated sensitivity is 87 dB and is given with an 8 Ω designation.

The power-handling figure is listed as 200, but no unit or measurement conditions are provided. It should therefore not be treated directly as the recommended amplifier power. When selecting an amplifier, first consider whether it is designed to work with 8 Ω loudspeakers and whether it provides sufficient power reserve.

Cabinet construction

The cabinet has a teardrop shape with non-parallel surfaces. This geometry is designed to reduce standing waves inside the enclosure. Internal shock absorbers help control mechanical cabinet vibrations.

The loudspeaker uses a bass-reflex system with a port located at the rear. Consequently, the distance from the wall affects the bass balance. The design also incorporates NCS Freeze and No Energy Storage (NES) technologies.

Positioning in the room

The loudspeaker measures 37 × 19.6 × 29 cm. Choose a stable stand suitable for the cabinet and the loudspeaker’s weight.

Because the bass-reflex port is at the rear, avoid placing the loudspeaker directly against a wall at the outset. Begin with some free space behind the cabinet and assess the sound from your listening position. Moving the loudspeaker closer to the wall will generally increase the bass level. If the bass becomes excessive, move it farther into the room.

Use the same distance from the rear wall for both stereo channels. Similar positioning conditions help maintain a more even balance between the channels. Make final adjustments to the angle and toe-in while listening from the main seating position.

Connecting it to your system

When connecting the loudspeaker to an amplifier, the main compatibility figure is its 8 Ω nominal impedance. No specific connector type or number of connectors is stated for this model. Choose the speaker cable according to the amplifier terminals, the required length and the layout of your system.

The crossover figure is listed as 2900, but its unit and measurement conditions are not specified. This is an internal loudspeaker characteristic and does not require adjustment during everyday use.

Finishes and included accessories

Piano-lacquer colours are available by special order, subject to confirmation of availability. Black fabric protective grilles are included.

Technical specifications

FAQ

Which amplifier should I choose?

Before buying, check that the amplifier is designed for use with 8 Ω loudspeakers. Do not treat the figure of 200 as the required amplifier power because it is provided without a unit or measurement conditions.

How do I connect the loudspeaker to an amplifier?

Use the amplifier’s speaker outputs and a suitable speaker cable. Select the cable terminations and connection method according to the terminals on your amplifier and loudspeaker.

Can the loudspeaker be placed directly against a wall?

The rear bass-reflex port must remain unobstructed. Leave some free space behind the cabinet and adjust the distance according to the bass balance at your listening position.

What type of stand is required?

Choose a stable stand suitable for the loudspeaker’s weight and cabinet. Select a height that places the drivers at an appropriate listening level when you are seated.

Are protective grilles included?

Yes. Black fabric protective grilles are included and can be used to cover the drivers on the front of the loudspeaker.