Pro-Ject 2-XPERIENCE PRIMARY Turntable
899,00 €
The Pro-Ject 2-XPERIENCE PRIMARY is a manual turntable for vinyl listeners building a stereo system. Its belt-drive system supports 33 and 45 rpm records, while the included Ortofon 2M Red cartridge simplifies initial setup. There is no built-in phono preamplifier, so an amplifier with a phono input or a separate phono preamp is required.
The Pro-Ject 2-XPERIENCE PRIMARY turntable is a manually operated model for vinyl records. It uses a belt-drive system, with a choice of playback speeds to suit the record. There is no built-in phono preamplifier, so the correct connection method should be considered before setting up the system.
Who is this turntable for?
This model is suitable for listeners who want to control record playback and operate the tonearm themselves. Automatic operation is not provided. It is therefore best suited to a system in which the direct, deliberate process of listening to vinyl is part of the experience.
An Ortofon 2M Red cartridge is included, so a separate cartridge does not need to be selected for the initial setup.
Operation and record speeds
The turntable supports 33 and 45 rpm playback. Select the correct speed according to the information printed on the record label. An incorrect setting will change both the tempo and pitch of the music.
Because this is a manual turntable, the listener starts playback and handles the tonearm. When the record finishes, the tonearm must be lifted from the record manually. This arrangement is suitable for buyers who do not require automatic functions.
Connecting it to a stereo system
There is no integrated phono preamplifier. The turntable signal must be connected either to a suitable phono input on an amplifier or to a separate phono preamp. The output from an external phono preamp can then be connected to a standard line-level input on the amplifier.
A line-level input alone is not sufficient without phono amplification and equalisation. The cartridge signal requires the correct gain and frequency correction. The power supply must meet the specified 15 V DC and 800 mA requirement.
Preparing the turntable for listening
Begin by placing the turntable level on a firm, stable surface. Only then should the tonearm and cartridge be prepared for use. The tracking force must be set appropriately for the Ortofon 2M Red, as an unsuitable setting can impair stylus tracking.
Do not place the turntable on the same unstable shelf as the speakers. Mechanical vibration can reach the stylus and feed back into the audio system. If low-frequency rumble or feedback is audible, first increase the distance between the turntable and the speakers.
Construction and dust-cover option
The record platter is made from MDF, while the tonearm is made from aluminium. The turntable dust cover is offered only in a clear version.
How to interpret the frequency range
The stated frequency response range is 20 Hz-22 kHz. It is provided without a measurement tolerance or other measurement conditions. This figure should therefore not be used on its own when comparing different turntable systems.
Technical specifications
| Product type | Manually operated turntable |
|---|---|
| Operation | Mechanical, manual |
| Drive principle | Belt drive |
| Platter | MDF |
| Playback speeds | 33 and 45 rpm |
| Tonearm | Aluminium |
| Cartridge | Ortofon 2M Red, included |
| Frequency response range | 20 Hz-22 kHz, measurement conditions not specified |
| Built-in phono preamplifier | No |
| Power requirement | 15 V DC / 800 mA |
| Turntable dust-cover option | Clear only |
FAQ
Does this turntable require a separate phono preamp?
A separate unit is not required if the stereo amplifier has a suitable phono input. If only line-level inputs are available, an external phono preamp will be needed.
How do I connect the turntable to an amplifier with a line input?
First connect the turntable signal to an external phono preamp. The preamp’s line-level output can then be connected to the amplifier input.
How do I choose between 33 and 45 rpm?
Follow the information on the label of the specific record. The speed indicates the required playback mode and should not be selected solely according to the record’s size.
What should I check before listening for the first time?
Check that the turntable is level and that the tonearm has been prepared for use with the Ortofon 2M Red. The tracking force should not be set arbitrarily.
Where should I place the turntable?
Choose a rigid, level surface as far as practical from speaker vibration. An unstable shelf can transmit vibration to the stylus.
Which dust cover is included in the configuration specified by the retailer?
According to the configuration stated by the retailer, this model is offered with a clear turntable dust cover.
