KEF Reference 4c Series Grille Speaker Grille Set

KEF Reference 4c Series Grille is a grille set designed specifically for the KEF Reference 4c Series loudspeaker. A separate grille is used for each individual driver. The grilles are held in place by a magnetic attachment system, allowing each piece to be fitted easily to its intended position on the front of the speaker.

This is a separately sold loudspeaker accessory, not the loudspeaker itself. The grilles are passive components and require no power supply, wiring or audio connections.

What this grille set is designed for

These speaker grilles are made for the KEF Reference 4c model. Their purpose is to cover the individual drivers on the front of the loudspeaker, with every grille occupying its own intended position. This is not a universal, single-piece grille that can be selected merely by comparing the approximate width, height or general appearance of a speaker.

Before ordering, confirm that your loudspeaker is specifically the KEF Reference 4c. The KEF brand name or Reference series name alone is not enough to establish compatibility. Compatibility with other KEF models has not been confirmed, so a similar cabinet size or driver arrangement is not a sufficient basis for choosing this accessory.

Separate grille for each driver

The front of the loudspeaker is not covered by one continuous grille. Each driver has its own individual grille, so it is important to identify the correct position for every piece during installation. Take your time and do not press down on a grille if it has been placed over the wrong part of the speaker.

The available information does not confirm the finish of the set or the exact number of grilles supplied. Please verify both details with the seller before purchasing. This is particularly important if you are replacing a grille that has previously been removed or lost and need to make sure that the contents of the ordered set will meet your requirements.

Magnetic attachment

The magnetic attachment system is designed to make fitting the grilles straightforward. Each piece is brought close to its intended position on the loudspeaker, where the magnets draw it into place. No additional screws, electrical connectors or speaker cables are needed for this process.

Before installation, make sure that you can reach the front of the loudspeaker without obstruction. Hold the grille by its edges, align it with the appropriate driver and move it slowly towards the mounting position. Allow the magnets to draw the grille into place, then check that it sits evenly and has not shifted to one side.

If a grille does not settle into position naturally, do not force it. First check its position and orientation, and confirm the exact model of the loudspeaker. When removing a grille, hold it carefully by the edges and pull it gently away from the front panel. You do not need to remove the other grilles first.

Positioning and everyday use

Position the loudspeaker in the room so that you can access its front directly whenever necessary. The edges of furniture, a display or other nearby objects should not press against the grilles or prevent their removal. If the speaker has already been installed as part of an audio system, fitting the grilles will be easier when there is enough clear space around the front for your hands.

For a system containing several loudspeakers, first count how many KEF Reference 4c speakers you want to equip. You should then ask the seller to confirm how many individual grilles are included in each set being sold. This will help you calculate the required number of sets regardless of how the loudspeakers are used within the audio system.

How to prepare your order

Write down the complete model name of your loudspeaker or check it on the original purchase documents. Inspect the front of the speaker to identify which positions need grilles, and count the number of loudspeakers you intend to equip. This information will help the seller confirm whether the selected accessory and ordered quantity are suitable for your intended use.

Before completing the order, confirm the finish of the set and the number of grilles it contains. These details are not established by the available source information and should not be assumed from the product name or photograph alone.

Technical specifications

Frequently asked questions

Is this a complete KEF loudspeaker?

No. This is a separately sold grille set intended for the KEF Reference 4c loudspeaker. The loudspeaker itself is not included with this product.

What should I confirm before ordering?

Check the exact model of your loudspeaker and ask the seller to confirm the finish of the grille set and the number of grilles included. The latter details are not specified in the available source information.

Does the set contain one full-width front grille?

No. According to the product information, a separate grille is used for each individual driver in the loudspeaker.

How are the grilles attached?

Each grille is placed against its intended position on the loudspeaker and held there by the magnetic attachment system. No additional screws or electrical connections are required during installation.

What should I do if a grille does not fit into place?

Do not force it. Check that you are using the correct position and orientation, and confirm that your loudspeaker model exactly matches the model for which this accessory is intended.

Are the dimensions and weight of the separate grille set specified?

No. The available source provides measurements and weight data for the complete KEF Reference 4c loudspeaker rather than for the separately sold grille set. Those figures therefore cannot be assigned to this accessory.