Alpine SWG-1244 Car Subwoofer Driver
85,00 €
Alpine SWG-1244 is a separate subwoofer driver for car audio systems. It has a 250 W RMS rating, an 800 W maximum power rating and a stated frequency range of 28 Hz-1 kHz. Sensitivity is 89.8 dB/W at 1 m. For installation, allow a 282 mm diameter mounting cutout and 172 mm of mounting depth.
Alpine SWG-1244 is a subwoofer driver for a car audio system. It serves as the low-frequency speaker in a vehicle sound system. The SWG-1244 is a separate speaker, rather than a subwoofer supplied in a box.
The driver has a 250 W RMS rating and an 800 W maximum power rating. These figures describe different power measures, so they should be considered separately. Its stated frequency range extends from 28 Hz to 1 kHz.
The SWG-1244 suits a car audio installation with enough room for the driver. Before selecting a mounting position, check the opening diameter and the space behind it. The driver’s sensitivity rating is measured at a distance of 1 m.
Benefits
- Car audio application – The SWG-1244 is designed to serve as the subwoofer driver in a vehicle sound system.
- Separate driver – This model is an individual speaker, giving buyers a clear distinction from a boxed subwoofer.
- RMS power rating – Its 250 W RMS figure provides a defined power measure for comparing subwoofer drivers.
- Maximum power rating – The separate 800 W maximum figure keeps peak capacity distinct from the RMS rating.
- Stated frequency range – The 28 Hz-1 kHz range identifies the operating limits given for this driver.
- Measured sensitivity – The 89.8 dB/W sensitivity figure includes a stated measurement distance of 1 m.
- Cutout measurement – A specified opening diameter helps you assess a proposed car audio mounting location.
- Depth measurement – A specified mounting depth helps you check the space available behind that opening.
Who Is This For?
The Alpine SWG-1244 is for buyers fitting a subwoofer driver into a car audio system. It is an individual speaker intended for a mounting position within the vehicle. The installation space must accommodate both the required opening and the driver’s depth.
This model also suits buyers comparing car subwoofers by clearly separated RMS and maximum power figures. Its frequency range and sensitivity provide two further stated measurements for that comparison. The sensitivity value is tied to a 1 m measurement distance.
The SWG-1244 can be assessed against a planned vehicle installation using its two mounting dimensions. Measure the intended cutout and the available depth before choosing the location. Its separate-driver format identifies the component being fitted as a speaker without a supplied box.
Technical Specifications
| Model | Alpine SWG-1244 |
|---|---|
| Product type | Car audio subwoofer driver |
| Format | Separate speaker; not a boxed subwoofer |
| RMS power | 250 W |
| Maximum power | 800 W |
| Frequency range | 28 Hz-1 kHz |
| Sensitivity | 89.8 dB/W, measured at 1 m |
| Mounting cutout diameter | 282 mm |
| Mounting depth | 172 mm |
Why Choose the Alpine SWG-1244?
The SWG-1244 presents its RMS and maximum power as separate specifications. That distinction lets you compare the driver using the power measure relevant to your car audio plans. The RMS value and the maximum value describe different aspects of this specific speaker.
Its frequency range has stated lower and upper limits. The sensitivity figure also includes the distance used for measurement. Together, these details make the SWG-1244 easier to assess against other drivers with comparable published measurements.
Both installation dimensions are available for checking a proposed mounting position. The opening measurement addresses the space needed across the mounting surface. The depth measurement addresses the room needed behind it. These figures are especially useful because the SWG-1244 is a separate driver.
FAQ
Is the Alpine SWG-1244 intended for a car audio system?
- Yes. The SWG-1244 is a subwoofer driver intended for installation in a vehicle sound system. It serves as that system’s low-frequency speaker component.
Is this car audio subwoofer supplied in a box?
- No. The Alpine SWG-1244 is a separate speaker, rather than a boxed subwoofer. Its installation requires space for the driver at the chosen car audio location.
What is the SWG-1244’s RMS power rating?
- The Alpine SWG-1244 has a 250 W RMS rating. Use that figure when comparing its RMS specification with another subwoofer driver.
What is its maximum power rating?
- The SWG-1244 has an 800 W maximum power rating. This is a separate specification from its RMS power rating.
What frequency range does the SWG-1244 cover?
- Its stated frequency range is 28 Hz to 1 kHz. Those endpoints define the published operating range for this subwoofer driver.
How is its sensitivity stated?
- The SWG-1244 has a sensitivity rating of 89.8 dB/W, measured at 1 m. The measurement distance forms part of the stated rating.
What mounting opening does the driver need?
- The Alpine SWG-1244 requires a 282 mm diameter mounting cutout. Check that diameter against the intended opening in your vehicle.
How much mounting depth does it need?
- The SWG-1244 requires 172 mm of mounting depth. Check the space behind the intended opening when planning its position.
Alpine SWG-1244 brings a defined set of power, frequency, sensitivity and fit measurements to a car audio build. Its separate-driver format makes the required mounting space an essential part of choosing where it belongs.