Alpine SWG-1044 Car Subwoofer Driver
80,00 €
The Alpine SWG-1044 is a standalone 10-inch car subwoofer driver for systems with a separate speaker mounting position. It is rated at 150 W RMS and 500 W maximum power, with a 30 Hz-1 kHz frequency range and 88.4 dB/W sensitivity at 1 m. Check the 235 mm mounting diameter and 139 mm depth against your installation space. This speaker does not include an enclosure.
The Alpine SWG-1044 is a standalone subwoofer driver for car audio systems with a separate subwoofer mounting position. It installs as a speaker without an enclosure, so its mounting dimensions matter when planning the location. This model suits a car audio build designed around a separate bass driver.
The SWG-1044 has a continuous power rating of 150 W RMS and a separate maximum power rating of 500 W. Its stated frequency range extends from 30 Hz to 1 kHz. Sensitivity is rated at 88.4 dB/W, measured at a distance of 1 m.
Before selecting a mounting position, allow for a 235 mm mounting diameter and 139 mm of depth. These measurements help assess the available space at and behind the mounting surface. The SWG-1044 is a nominal 10-inch, or 25 cm, speaker rather than a boxed subwoofer.
Benefits
- Standalone driver – The SWG-1044 is intended for car audio installations that mount a separate subwoofer speaker. Its design leaves the mounting location to the installation plan.
- 150 W RMS rating – The continuous power figure is identified independently. This makes the SWG-1044 easier to compare using RMS ratings.
- 500 W maximum power – The maximum rating is listed separately from the continuous rating. The two figures describe different power measures for this model.
- 30 Hz-1 kHz frequency range – The published range identifies the frequencies the SWG-1044 is specified to reproduce. It gives buyers a defined range for comparison.
- 88.4 dB/W sensitivity – The sensitivity figure includes its 1 m measurement distance. Both details matter when comparing published speaker ratings.
- 235 mm mounting diameter – This dimension helps establish whether the intended mounting position can accommodate the driver. Check it against the planned installation space.
- 139 mm depth – This measurement shows how much room the speaker requires behind the mounting surface. It is relevant wherever rear space is limited.
Who Is This For?
The Alpine SWG-1044 is for a car audio system that calls for a separate subwoofer driver. It is suitable for buyers planning a dedicated mounting position rather than selecting a complete boxed subwoofer. The reference information names no specific vehicle makes or models, so fit depends on the available installation space.
For a planned car audio installation, compare the mounting position with the SWG-1044’s 235 mm mounting diameter. Then check whether 139 mm of depth is available behind that position. Both measurements are needed when assessing physical fit.
This Alpine model also suits shoppers comparing subwoofer drivers by continuous power, maximum power, frequency range, and sensitivity. Its 150 W RMS figure identifies the continuous rating. The 500 W figure identifies maximum power, so the two should be read separately.
Technical Specifications
| Specification | Alpine SWG-1044 |
|---|---|
| Product type | Car subwoofer driver |
| Nominal size | 10 inches (25 cm) |
| RMS power | 150 W |
| Maximum power | 500 W |
| Frequency range | 30 Hz-1 kHz |
| Sensitivity | 88.4 dB/W at 1 m |
| Mounting diameter | 235 mm |
| Depth | 139 mm |
| Enclosure | Standalone speaker without a box |
Why Choose the Alpine SWG-1044?
The SWG-1044 presents its two power ratings clearly: 150 W RMS for continuous power and 500 W for maximum power. That distinction helps when comparing it with other car subwoofer drivers. It also keeps the larger maximum figure from being mistaken for its continuous rating.
The supplied mounting measurements address two separate space checks. The 235 mm diameter concerns the mounting position, while the 139 mm depth concerns space behind it. Together, they provide a practical starting point for assessing where this standalone driver can be installed.
The 30 Hz-1 kHz frequency range and 88.4 dB/W sensitivity add useful comparison details. The sensitivity rating specifies a 1 m measurement distance. These figures describe the SWG-1044 itself, while its enclosure-free format distinguishes it from a complete boxed subwoofer.
Frequently Asked Questions
Is the Alpine SWG-1044 for car audio systems?
- Yes. The SWG-1044 is a car subwoofer driver for installations with a separate speaker mounting position.
Will the Alpine SWG-1044 fit my car audio system?
- Check the intended location against its 235 mm mounting diameter and 139 mm depth. No specific vehicle compatibility is stated.
Is this a boxed subwoofer?
- No. The SWG-1044 is a standalone speaker driver without an enclosure.
What is its continuous power rating?
- The Alpine SWG-1044 is rated at 150 W RMS for continuous power.
What is its maximum power rating?
- The SWG-1044 has a 500 W maximum power rating, listed separately from its RMS rating.
What frequency range does it cover?
- The stated frequency range for this subwoofer driver is 30 Hz to 1 kHz.
What is the sensitivity rating?
- The SWG-1044 is rated at 88.4 dB/W, measured at a distance of 1 m.
Choose the Alpine SWG-1044 for a car audio installation that uses a separate subwoofer driver. Confirm the mounting diameter and rear depth against the planned location before fitting it.
