IsoTek EVO3 Optimum Power Cable
1 300,00 €
IsoTek EVO3 Optimum is a 2.0 m power cable for audio and video equipment. It is available with a C7, C15 or C19 equipment connector. Its three 3.0 mm² silver-plated OCC copper conductors use square strands, while the flexible PVC jacket makes the cable easier to route behind equipment.
IsoTek EVO3 Optimum power cable is a 2.0 m cable designed for audio and video equipment. It is available with a choice of C7, C15 or C19 equipment connector.
The cable can be used with CD and Blu-ray players, preamplifiers, tuners and power amplifiers. It is also intended for music servers, televisions and soundbars.
Conductors and internal construction
The cable is built around three 3.0 mm² conductors. They are made from silver-plated Ohno Continuous Cast copper, commonly abbreviated to OCC copper.
Each conductor consists of square strands. The store specification does not state the number of strands or the individual dimensions of each strand.
Fluorinated ethylene propylene dielectric, abbreviated to FEP, separates the conductors. Cotton filler, a PVC barrier and a Mylar layer are also used inside the cable. Together, these materials form separate internal layers around the conductors.
The outer jacket is made from high-flexibility PVC. This makes the cable easier to route behind equipment or furniture. Nevertheless, a cable with a 12.5 mm diameter needs more space than a thin domestic power lead.
How to choose the connector
C7, C15 and C19 are not three connectors supplied on one cable. They are separate versions of this model. Choose the required version by checking the shape of the power inlet on your equipment and the marking next to it.
The C7 version is suitable only for equipment designed to accept a C7 connector. The same rule applies to the C15 and C19 versions. A broadly similar inlet shape is not enough to confirm compatibility because these connector types are not interchangeable.
The connector contacts are plated with 24-carat gold. The selected cable version determines the connector fitted at the equipment end, so the correct option should be chosen before the system is installed. An additional adapter should not be treated as part of the intended connection arrangement.
Length and cable routing
The standard cable length is 2.0 m. Before choosing it, measure the complete route from the power point to the equipment inlet. Allow enough space for the plug, changes in direction and any movement required to pull the equipment forward from its shelf.
The 12.5 mm outer diameter is important when planning cable channels and openings in furniture. This should not be treated as an especially thin cable for narrow gaps. Its flexible PVC jacket makes routing easier, but the cable should not be bent sharply where it meets the connector.
Leave a free section behind the equipment so that the cable does not pull on the power inlet. This is particularly relevant to lightweight players and music servers, which may move if the cable is under tension. Route it so that it is not trapped or compressed by the rear panel of a cabinet.
Use in audio and video systems
In a stereo system, the cable can be selected for a CD player, preamplifier or power amplifier. When planning a system with several components, a separate EVO3 Optimum cable can be chosen for each compatible device, with enough room allowed to route the cables behind the equipment.
In a home cinema system, this model can be used with a Blu-ray player, television or soundbar. It is a power cable rather than an HDMI or audio signal cable, so it does not carry video or audio data between components.
The stated cable current rating is 16 A. This value must not automatically be interpreted as the current rating of every C7, C15 and C19 connector option. The final operating limit is determined by the selected connector and the requirements of the connected equipment.
Technical specifications
| Model | IsoTek EVO3 Optimum |
|---|---|
| Product type | Power cable |
| Standard length | 2.0 m |
| Conductor configuration | 3 × 3.0 mm² |
| Conductor strands | Square |
| Conductor material | Silver-plated Ohno Continuous Cast copper |
| Dielectric | Fluorinated ethylene propylene |
| Filler | Cotton |
| Internal barrier | PVC |
| Additional layer | Mylar |
| Outer jacket | High-flexibility PVC |
| Outer diameter | 12.5 mm |
| Cable current rating | 16 A |
| Equipment connector options | C7, C15 or C19 |
| Connector contact plating | 24-carat gold |
FAQ
What does 3 × 3.0 mm² mean?
This is the three-conductor configuration stated by the store. Each of the three conductors has a cross-sectional area of 3.0 mm².
How do I determine which connector version I need?
Inspect the power inlet on your equipment and check the marking beside it. The shape and type of the selected connector must match the inlet exactly.
Is the cable suitable for a stereo amplifier?
It can be used with preamplifiers and power amplifiers. Before use, check the electrical requirements of the specific amplifier and make sure the selected connector is correct.
How can it be used in a home cinema system?
The cable can be selected for a television, Blu-ray player or soundbar. It supplies power and is not intended to carry video or audio signals.
Can I order the cable in a custom length?
The store information states that custom cable lengths are available. The required length and its availability must be confirmed before placing an order.
How much space should I leave behind the equipment?
Allow room for the 12.5 mm cable and for it to turn without being forced. The connector must not be pressed against furniture or pulled sideways.
Does the stated cable current rating apply to every connector?
It should not be treated as a universal limit for every connector version. Use must comply with the requirements of both the selected connector and the powered equipment.
