Oehlbach TOSLINK Optical Connector
23,00 €
This straight Oehlbach TOSLINK male connector is designed for terminating an Oehlbach Red Opto Star M fibre-optic cable. Its enclosed black plastic housing gives the plug a clean, unified form. The straight design suits systems with enough space behind the equipment for the cable to run away in line with the socket. This is a separate connector, not a ready-made optical cable.
This straight Oehlbach TOSLINK male connector is designed for the Oehlbach Red Opto Star M fibre-optic cable. It is fitted to the end of the cable to create a TOSLINK connection. The black plug has a fully enclosed plastic housing.
Purpose and correct product selection
This is a separate optical connector, not a ready-made digital cable. It is intended for terminating an Oehlbach Red Opto Star M fibre-optic cable. This type of component is useful when assembling a cable to the required length or replacing its existing plug.
The product is a TOSLINK plug that mounts on the end of the cable. It is not a signal converter and does not convert one connector format into another.
Straight plug design
The straight plug is suitable when the cable can run away from the connected device in line with the socket. This design provides a clear and direct cable-routing path. Enough space must be left behind the equipment for both the plug itself and a gentle bend in the cable.
If the device is positioned very close to a wall, check the available clearance before choosing this connector. A fibre-optic cable should not be bent sharply immediately behind the plug. Insufficient clearance may force the cable into a tight bend too close to the connection point.
Enclosed plastic housing
The connector has an enclosed housing made from plastic. This housing surrounds the connector assembly and gives the plug a clean, unified external form. Its black finish is visually compatible with the connection panels found on most audio and video equipment.
The enclosed construction does not alter the connector standard. It also does not mean that the product is waterproof or suitable for outdoor installation. This connector is intended for conventional TOSLINK audio connections.
Use in an audio system
TOSLINK is an optical connection used for digital audio signals. Once properly assembled, a cable fitted with this plug can connect the optical output of a source to the optical input of another device. Both devices must be equipped with standard TOSLINK sockets.
In a stereo system, the completed cable may be used between a compatible digital source and a converter or amplifier. In a home cinema system, it can be used with equipment that provides the corresponding optical output and input. The connector itself does not determine which audio format will be transmitted.
Assembly and connection guidance
This connector must be installed on the Oehlbach Red Opto Star M cable for which it is specified. The end of the cable must be prepared in accordance with the installation method required by the selected plug. If the optical surface is prepared incorrectly, signal transmission may be impaired.
Before inserting the plug, align its profile with the TOSLINK socket. Do not force the connector into place or twist it while it is inside the socket. When correctly orientated, the plug should be inserted in a straight line.
Plan the cable route so that it does not contain sharp bends. The optical cable should not be trapped under furniture or placed under tension at the connector. A straight plug is best suited to installations where enough space can be provided for the cable to leave the equipment without being sharply bent.
Important information before purchase
This product is intended for cable assembly or connector replacement. If you need a solution that can be used immediately, choose a fully terminated TOSLINK cable instead. A separate connector is appropriate when you already have the compatible fibre-optic cable and the tools or equipment required to assemble it correctly.
Because this is a straight connector, it is not a substitute for an angled plug in a confined space. It should also not be selected for a cable with a different diameter or construction. The stated application is limited to the Oehlbach Red Opto Star M cable.
Technical specifications
| Product type | TOSLINK male optical connector |
|---|---|
| Purpose | Terminating the end of a fibre-optic cable |
| Specified cable | Oehlbach Red Opto Star M |
| Plug design | Straight |
| Housing construction | Enclosed plastic plug |
| Colour | Black |
FAQ
Is this a ready-made optical cable?
No. It is a separate male connector that must be fitted to the end of a fibre-optic cable. A compatible cable and proper assembly are still required before it can be used to connect two devices.
Is the connector suitable for other fibre-optic cables?
Compatibility is stated only for the Oehlbach Red Opto Star M. You should therefore not assume that this connector will fit or work correctly with other fibre-optic cables.
Which type of socket accepts this plug?
The plug connects to a standard TOSLINK optical socket. The equipment being connected must have the appropriate optical input or output.
Can this connector be used in stereo and home cinema systems?
Yes, provided that the specific components in the system have TOSLINK sockets. It can be used to prepare an optical cable for connecting a digital source to compatible audio equipment.
Is this connector suitable for a confined space behind a device?
Only when sufficient clearance is available. A straight plug requires enough room for the connector itself and for the cable to follow a gentle bend without being sharply folded.
Are two plugs supplied?
The stated value “2.00 Stck.” is not sufficient to determine the supplied quantity reliably. Check the package quantity before purchasing.
How should the plug be inserted safely?
Align the TOSLINK profile with the socket and push the plug straight in. Do not use force if the connector does not insert easily.
