Oehlbach Mini Spike Isolation Spikes
18,00 €
Oehlbach Mini Spike is a set of miniature isolation spikes for smaller speaker cabinets. The four solid-metal spikes help reduce the transfer of unwanted resonances to the supporting surface. Each component is 11 mm high and 21 mm in diameter. The set includes the washers required for arranging the support points.
Oehlbach Mini Spike is a set of four miniature isolation spikes designed for smaller speaker cabinets. They act as vibration dampers, helping to reduce the transfer of unwanted resonances to the supporting surface. The set includes the washers required for arranging the support points.
Purpose and operating principle
A speaker cabinet vibrates along with the drivers operating inside it. Firm, direct contact can transfer some of these vibrations to a shelf, speaker stand, or another supporting surface. The spikes create clearly defined points of mechanical contact and help reduce the transmission of these resonances.
This accessory is intended for smaller speaker cabinets. It can be useful when a speaker is placed on furniture, a shelf, or a separate stand. Its mechanical construction does not depend on the speaker’s electrical characteristics, the type of amplifier, or the audio cables used in the system.
Speaker spikes are not a substitute for acoustic treatment. They address the mechanical connection between the cabinet and its support. The position of the speaker in relation to the walls and listening position must still be chosen to suit the individual room.
Metal construction
Each spike is made from solid metal. This construction creates a rigid support point between the speaker cabinet and the washer beneath it. The black finish coordinates well with many dark speaker cabinets and stands.
The 11 mm height allows the spikes to form low-profile supports, so they raise the speaker cabinet only slightly. Their 21 mm diameter is important when planning the positions of all four support points beneath the cabinet.
These compact dimensions are particularly relevant for narrower speaker enclosures. All four components must fit within the boundaries of the cabinet base. The supports should not sit on an edge or prevent the speaker from standing securely.
Set contents and installation planning
One set contains four spikes and washers. The four components form a four-point support for one speaker cabinet. If you want to install matching supports beneath both speakers in a stereo pair, a separate set is required for each cabinet.
Before installation, check that the 21 mm diameter and 11 mm high spikes, together with their washers, fit at the selected support points beneath the speaker cabinet. Every support point must remain within the area of the cabinet base, and the underlying surface must be stable.
The available product information does not specify the exact method used to attach these spikes. You should therefore confirm that they are compatible with the particular cabinet and follow the manufacturer’s instructions before installation.
After fitting the supports, make sure the speaker stands securely and that every support point rests properly on the intended surface. A careful layout is especially important with a compact cabinet, where there may be limited room between the support points and the edges of the base.
Use in an audio system
This is a passive mechanical accessory, so it requires no power supply, audio connections, or controls. The spikes are not connected to the amplifier or to the speaker terminals. Their suitability is determined by the size and base of the cabinet and by the planned arrangement of the support points.
The set can be used in an audio system when the aim is to reduce the transfer of resonances between a smaller speaker cabinet and the surface supporting it. Its role is limited to this mechanical interface and should not be confused with electrical system components or room-acoustic products.
Once the supports have been installed, assess the result from your normal listening position using a recording you know well. Listen for unwanted resonance from the furniture or speaker stand. If the cabinet rocks or feels unstable, correct the positioning of the supports before making any further assessment.
How to choose the right position
Begin by checking the available area on the bottom of the speaker cabinet. There must be enough space for four 21 mm diameter components to sit entirely within the outline of the base. You must also make sure that the washers and the intended attachment method are compatible with the cabinet.
The furniture, shelf, or speaker stand must already be stable before the spikes are installed. This set is intended to reduce resonance transfer, not to correct an unstable supporting structure. Confirm compatibility before installation and follow the manufacturer’s instructions when fitting the components.
Technical specifications
| Model designation | Mini Spike Set |
|---|---|
| Product type | Set of miniature isolation spikes |
| Purpose | Acoustic isolation of smaller speaker cabinets from the supporting surface |
| Function | Reduces the transfer of unwanted resonances from the cabinet to the supporting surface |
| Material | Solid metal |
| Height | 11.0 mm |
| Diameter | 21.0 mm |
| Colour | Black |
| Quantity | 4 pieces |
| Package contents | 4 miniature spikes and washers |
FAQ
What is this spike set designed for?
It is designed for smaller speaker cabinets. The spikes help reduce the transfer of unwanted resonances from the cabinet to a shelf, stand, or another supporting surface.
Is one set enough for a stereo pair of speakers?
The set contains four spikes and washers, providing four-point support for one cabinet. To fit both speakers in a stereo pair in the same way, you will need a separate set for each cabinet.
Do the spikes need to be connected to the amplifier?
No. These are mechanical supports with no electrical or audio connections. They operate between the speaker cabinet and the surface on which the speaker is placed.
What is the maximum permitted load?
A reliable maximum load rating for this model cannot be provided because the information available to the store contains two conflicting figures and there is no independent confirmation. Check this value in the manufacturer’s documentation before choosing the product.
How should I prepare for installation?
Before installation, confirm that the dimensions and attachment method are compatible with the particular cabinet, and follow the manufacturer’s instructions during fitting. The supports must remain within the boundaries of the base and provide a stable position for the speaker.
Which dimensions should I check before buying?
Check that the base of the speaker has enough room for the 21.0 mm diameter, 11.0 mm high spikes and their washers. Verify compatibility with the required attachment method by consulting the manufacturer’s instructions.
