SUMIKO WRX Wireless Audio Receiver for Subwoofers
249,00 €
The SUMIKO WRX is a wireless audio receiver for a home hi-fi subwoofer setup. It receives audio over a radio-frequency link with a stated indoor range of 10 m. Two low-level outputs each use a single RCA (cinch) plug. Output impedance is less than 1 kΩ, and power consumption is less than 0.5 W. The enclosure measures 180 × 70 × 170 mm.
The SUMIKO WRX is a wireless audio receiver for a subwoofer in a home hi-fi system. It receives audio over a radio-frequency link and passes the signal through two low-level outputs. Its stated indoor wireless range is 10 m.
Each WRX output uses a single RCA (cinch) plug. The device receiving its signal therefore needs a suitable connection for that plug and a low-level audio signal. Checking the input connection helps establish whether the WRX fits the intended subwoofer setup.
The WRX suits listeners arranging a home hi-fi system around a subwoofer connection. Its compact, separate enclosure can be placed where its output plugs reach the connected equipment. At 180 × 70 × 170 mm, its width, height, and depth can be considered when planning that space.
Benefits
- Wireless audio reception – The WRX receives the audio signal through a radio-frequency connection. This gives the subwoofer setup a wireless receiving point.
- 10 m indoor range – The stated operating distance applies indoors. It provides a clear distance figure when planning where to position the receiver.
- Two low-level outputs – The received signal leaves the WRX through two audio outputs. Both outputs are designed for low-level signals.
- Individual RCA plugs – Each output has its own RCA (cinch) plug. These plugs define the physical connection required at the receiving equipment.
- Output impedance below 1 kΩ – This specification describes the electrical output presented by the receiver. It is useful when checking connection requirements.
- Power consumption below 0.5 W – The WRX’s stated consumption is under half a watt. This figure describes the receiver itself.
- Defined enclosure size – The 180 × 70 × 170 mm body gives you exact measurements for placement. The dimensions are listed as width, height, and depth.
Who Is the SUMIKO WRX For?
The SUMIKO WRX is intended for a home hi-fi system with a subwoofer. It serves as the receiving end of a radio-frequency audio connection. From there, its two low-level outputs provide the wired connection to suitable audio inputs.
It is relevant when the planned connection accepts individual RCA plugs and a low-level signal. The plug format matters because each WRX output terminates in a single RCA connector. Checking the destination inputs establishes how those outputs can be used in a particular system.
The WRX is a receiver, rather than the subwoofer that reproduces low frequencies. Its role is to accept a wireless audio signal and make that signal available at its outputs. This distinction helps identify where it belongs in the home hi-fi signal path.
Technical Specifications
| Product | SUMIKO WRX |
|---|---|
| Product type | Wireless audio signal receiver for a subwoofer |
| Wireless connection | Radio-frequency audio reception |
| RF receiver sensitivity | -90 dB |
| Indoor wireless range | 10 m |
| Audio outputs | Two low-level outputs, each with a single RCA (cinch) plug |
| Output impedance | Less than 1 kΩ |
| Power consumption | Less than 0.5 W |
| Dimensions | 180 × 70 × 170 mm (width × height × depth) |
Why Choose the SUMIKO WRX?
The WRX combines radio-frequency reception and low-level RCA outputs in one device. That combination gives a home hi-fi subwoofer setup a defined path from wireless reception to a wired connection. Its two separate output plugs also make the available connections easy to identify.
The receiver’s published electrical figures help with system planning. Its -90 dB RF receiver sensitivity describes the receiving stage. Meanwhile, the output impedance figure describes the signal connection leaving the unit.
Physical planning is straightforward with the WRX’s stated dimensions and indoor range. The enclosure measurements help determine where the receiver can sit. The 10 m range identifies the stated distance for its radio-frequency link inside a room.
FAQ
Is the SUMIKO WRX suitable for a home hi-fi subwoofer?
- Yes. The WRX is a wireless audio receiver intended for a home hi-fi system with a subwoofer. Check that the destination accepts its low-level RCA outputs.
What connection does a home hi-fi subwoofer setup need for the WRX?
- The WRX provides two low-level outputs with individual RCA plugs. The equipment receiving its signal needs connections suitable for those plugs.
Does the SUMIKO WRX receive audio wirelessly?
- Yes. The WRX receives an audio signal over a radio-frequency link and presents it at its wired outputs.
What is the WRX’s stated indoor operating distance?
- Its radio-frequency link has a stated indoor range of 10 m. This is the distance figure to use when planning receiver placement.
How many audio outputs does the receiver provide?
- The WRX has two low-level audio outputs. Each output uses one RCA (cinch) plug.
What is the RF receiver sensitivity?
- The SUMIKO WRX has a stated RF receiver sensitivity of -90 dB.
How much power does the WRX consume?
- The receiver’s stated power consumption is less than 0.5 W.
How large is the receiver?
- The WRX measures 180 mm wide, 70 mm high, and 170 mm deep.
For a home hi-fi subwoofer setup, the SUMIKO WRX provides radio-frequency audio reception and two low-level RCA outputs. Its connector format, 10 m indoor range, and enclosure dimensions provide the key details for planning its place in the system.
