Alpine KAE-232DA DAB Antenna for Car Radios
30,00 €
The Alpine KAE-232DA is an omnidirectional DAB antenna for car digital radio receivers. It covers Band III at 170-240 MHz and L Band at 1452-1495 MHz. A 5 m cable ends in a right-angle female SMB connector for a matching male connection. The black, 50 Ω antenna measures 13 × 183 mm and requires 12 V at 20 mA.
The Alpine KAE-232DA is a DAB antenna for car digital radio receivers. It receives Band III and L Band signals through an omnidirectional design. A 5 m cable connects the antenna to a receiver with a matching male SMB antenna socket.
This model suits drivers fitting a car DAB receiver that accepts a right-angle female SMB connector. Its cable provides 5 m of reach between the antenna and receiver. The antenna requires a 12 V supply and draws 20 mA.
The black antenna measures 13 × 183 mm, helping you assess its installation space. Its impedance is 50 Ω. Check the receiver connection, power supply, and available space when planning the installation.
Key benefits
- Two frequency bands – Band III covers 170-240 MHz, while L Band covers 1452-1495 MHz for digital radio reception.
- Omnidirectional reception – The antenna receives signals arriving from different directions, so its operation does not depend on pointing it toward one source.
- 5 m connection cable – The included cable lets you position the antenna away from the car radio receiver.
- Right-angle SMB connection – Its female SMB connector mates with a corresponding male SMB antenna connection on the receiver.
- Defined power requirement – The antenna operates from a 12 V supply and draws 20 mA.
- 50 Ω impedance – This stated specification helps you check the antenna against your receiver’s connection requirements.
- Compact dimensions – Its 13 × 183 mm size gives you a measurement to use when assessing installation space.
Who is this antenna for?
The Alpine KAE-232DA is intended for a car DAB radio receiver. It is relevant when the receiver’s antenna connection accepts a right-angle female SMB connector. The receiver connection must therefore provide a corresponding male SMB fitting.
This antenna is also suited to installations requiring reception across both stated bands. Band III spans 170-240 MHz, and L Band spans 1452-1495 MHz. Its omnidirectional design receives signals from different directions within its supported frequency ranges.
Before fitting the KAE-232DA, account for its 12 V power requirement and 20 mA current draw. The 5 m cable determines how far the antenna can sit from the receiver. Its 13 × 183 mm dimensions provide a clear starting point for checking the proposed location.
Technical specifications
| Product | Car DAB radio antenna |
|---|---|
| Model | Alpine KAE-232DA |
| Band III frequency range | 170-240 MHz |
| L Band frequency range | 1452-1495 MHz |
| Power supply | 12 V |
| Current draw | 20 mA |
| Reception pattern | Omnidirectional |
| Impedance | 50 Ω |
| Cable length | 5 m |
| Connector | Right-angle female SMB |
| Colour | Black |
| Dimensions | 13 × 183 mm |
Why choose the Alpine KAE-232DA?
The KAE-232DA combines two specified digital radio frequency ranges in one car antenna. Band III covers 170-240 MHz; L Band covers 1452-1495 MHz. These figures make its supported reception ranges clear when selecting an antenna for a DAB receiver.
Its omnidirectional design receives signals from different directions. The 5 m lead also allows separation between the antenna and the receiver. Together, these features give you useful flexibility when deciding where each component will sit in the car.
The right-angle female SMB connector defines the required mating connection. Its 50 Ω impedance, 12 V supply, and 20 mA current draw provide further checks for your installation. The black finish and 13 × 183 mm dimensions complete the physical details.
Frequently asked questions
Is the Alpine KAE-232DA intended for a car DAB receiver?
- Yes. The KAE-232DA is a car DAB radio antenna intended for an in-car digital radio receiver.
What connection does a car DAB receiver need for this antenna?
- The receiver needs a male SMB antenna connection to mate with the cable’s right-angle female SMB connector.
Which frequency bands does the KAE-232DA cover?
- It covers Band III at 170-240 MHz and L Band at 1452-1495 MHz.
Does this antenna need power?
- Yes. The Alpine KAE-232DA requires 12 V and draws 20 mA.
Does the antenna need to face one direction?
- No. Its omnidirectional reception pattern receives signals arriving from different directions.
How long is the connection cable?
- The antenna has a 5 m cable ending in a right-angle female SMB connector.
What space should I allow for the antenna?
- The black antenna measures 13 × 183 mm; use those dimensions when checking the proposed installation space.
The Alpine KAE-232DA brings Band III and L Band reception to a car DAB radio setup. Its 5 m cable, female SMB connection, and stated electrical requirements give you concrete details for checking your installation.