Oehlbach Speaker Wire 15 Flat Stereo Speaker Cable
3,20 €
Oehlbach Speaker Wire 15 is a flat stereo speaker cable for amplifiers rated up to approximately 110 W per channel. It measures 8.5 × 3.0 mm, with a 2 × 1.5 mm² conductor cross-section. Fine HPOCC® oxygen-free copper wires form flexible bundles, and the durable plastic-compound jacket remains flexible. Made in Switzerland, the cable is available in clear, black, and white.
Oehlbach Speaker Wire 15 is a flat stereo speaker cable for connecting speakers to an amplifier. It suits amplifiers rated up to approximately 110 W per channel. Its slim shape and flexible construction help when planning a cable route around a stereo system.
The cable measures 8.5 × 3.0 mm and has a conductor cross-section of 2 × 1.5 mm². Its inner conductors use HPOCC® oxygen-free copper (OFC). Numerous very fine individual wires are twisted into bundles, giving the cable flexibility during installation.
Speaker Wire 15 is available in clear, black, and white. These options let you choose a finish for a visible cable run. Made in Switzerland, it also has a durable plastic-compound jacket that remains flexible.
Benefits
- Defined amplifier range – suitable for connecting stereo speakers to amplifiers rated up to approximately 110 W per channel.
- Flat profile – the 8.5 × 3.0 mm dimensions give you precise measurements for planning a route.
- Two-conductor construction – the 2 × 1.5 mm² specification identifies the cross-section of both conductors.
- Fine wire bundles – many thin individual wires are twisted together to make the cable easier to lay.
- Oxygen-free copper – the inner conductors are made from HPOCC® oxygen-free copper.
- Flexible outer jacket – a durable plastic compound protects the cable while retaining flexibility.
- Choice of finishes – clear, black, and white versions offer options for different visible cable runs.
- Swiss manufacture – Speaker Wire 15 is made in Switzerland.
Who Is This Cable For?
Speaker Wire 15 is for a stereo speaker setup connected to an amplifier within its stated power range. The relevant amplifier rating is up to approximately 110 W per channel. Check that per-channel figure when choosing cable for your system.
Its measurements are useful when the cable route has limited space. The flat jacket is 8.5 mm wide and 3.0 mm thick. You can compare those dimensions with the space available along your planned route.
The fine wire construction also matters when a route requires the cable to bend. Its individual wires form flexible bundles, while the plastic-compound jacket remains flexible too. Together, these features make the cable easier to lay.
Technical Specifications
| Model | Oehlbach Speaker Wire 15 |
|---|---|
| Type | Flat stereo speaker cable |
| Application | Connecting speakers to an amplifier |
| Suitable amplifier power | Up to approximately 110 W per channel |
| Conductor cross-section | 2 × 1.5 mm² |
| Cable dimensions | 8.5 × 3.0 mm |
| Inner conductor material | HPOCC® oxygen-free copper (OFC) |
| Inner conductor construction | Very fine individual wires twisted into bundles |
| Jacket | Durable, flexible plastic compound |
| Shape | Flat |
| Available colours | Clear, black, white |
| Listed sales unit | 1.00 m; this is not a fixed length for every cable |
| Country of manufacture | Switzerland |
Why Choose Oehlbach Speaker Wire 15?
The flat shape gives this cable a clearly defined profile. Its width and thickness are stated separately, making the space needed for a run easier to assess. That is useful when planning where the cable will pass beside stereo equipment.
The inner conductor combines HPOCC® oxygen-free copper with a construction based on fine wires. Those wires are twisted into bundles, allowing the cable to flex during laying. The outer plastic compound is durable and flexible as well.
Speaker Wire 15 also gives you three colour options without changing its stated application. Clear, black, and white versions are available. Whichever colour you choose, the cable is intended for speaker-to-amplifier connections within the stated per-channel power range.
FAQ
Can I use it with an amplifier rated at 110 W per channel?
- Yes. Speaker Wire 15 is suitable for amplifiers rated up to approximately 110 W per channel.
Is it intended for connecting stereo speakers to an amplifier?
- Yes. It is a stereo speaker cable designed to connect speakers to an amplifier.
What does the 2 × 1.5 mm² specification mean?
- It states the cross-section of the cable’s two conductors: 1.5 mm² for each conductor.
How much space does its flat profile require?
- The cable measures 8.5 mm wide and 3.0 mm thick. Use both measurements when assessing a planned route.
Why is the cable flexible?
- Its many fine individual wires are twisted into bundles. The durable plastic-compound jacket also remains flexible.
What material is used for the inner conductors?
- The inner conductors are made from HPOCC® oxygen-free copper.
Does the listed 1.00 m sales unit mean every cable has a fixed one-metre length?
- No. The 1.00 m figure describes the listed sales unit, not a fixed length for every cable.
Oehlbach Speaker Wire 15 brings a measured flat profile, flexible construction, and Swiss manufacture to stereo speaker wiring. It is available in clear, black, or white for an amplifier connection within its stated power range.