TAD Evolution Two Floorstanding Speaker (TAD-E2-WN)
17 000,00 €
The TAD Evolution Two is a passive, 2.5-way bass-reflex floorstanding speaker for home hi-fi. Each cabinet houses two 15.5 cm cone woofers and a 2.5 cm beryllium dome tweeter, with a 30 Hz-60 kHz frequency response. For amplifier matching, note its 6 Ω nominal impedance, 4.5 Ω minimum impedance, and 150 W maximum input power. Model: TAD-E2-WN.
The TAD Evolution Two is a passive floorstanding speaker for a home hi-fi system. Model TAD-E2-WN uses a 2.5-way bass-reflex design with two 15.5 cm cone woofers and a 2.5 cm beryllium dome tweeter.
Its frequency response extends from 30 Hz to 60 kHz. When choosing an amplifier, consider its 6 Ω nominal impedance, 4.5 Ω minimum impedance, and 150 W maximum input power. Each speaker weighs 32 kg, so its placement deserves planning.
Key Benefits
- Three-driver layout: Two 15.5 cm (6 1/2 in) cone woofers work with one 2.5 cm (1 in) beryllium dome tweeter.
- Defined crossover points: The 2.5-way system uses crossover frequencies of 90 Hz and 2.8 kHz.
- Known sensitivity: Its 87 dB rating is measured at 2.83 V and a distance of 1 m.
- Flexible placement height: The cabinet stands 1085 mm tall, or 1113 mm with the supplied spikes fitted.
- Separate woofer grilles: Two sets of grilles are included for the speaker’s low-frequency drivers.
- Placement accessories: The package includes spikes, holders, additional feet, non-slip pads, and anti-tip spikes.
Who Is This Speaker For?
The TAD Evolution Two suits a home hi-fi system built around an amplifier and passive speakers. Its floorstanding cabinet provides a defined footprint of 320 mm wide by 405 mm deep.
Model TAD-E2-WN is the product identifier to use when planning this speaker within a stereo setup. Allow for its 1113 mm height with spikes and its 32 kg weight per speaker.
Technical Specifications
| Specification | TAD Evolution Two |
|---|---|
| Model | TAD-E2-WN |
| Type | Passive, 2.5-way bass-reflex floorstanding speaker |
| Woofers | 2 × 15.5 cm (6 1/2 in) cone drivers |
| Tweeter | 1 × 2.5 cm (1 in) beryllium dome |
| Frequency response | 30 Hz-60 kHz |
| Crossover frequencies | 90 Hz and 2.8 kHz |
| Maximum input power | 150 W |
| Sensitivity | 87 dB (2.83 V, 1 m) |
| Nominal / minimum impedance | 6 Ω / 4.5 Ω |
| Dimensions per speaker | 320 W × 1085 H × 405 D mm; 12 5/8 W × 42 23/32 H × 15 15/16 D in |
| Height with spikes | 1113 mm (43 13/16 in) |
| Weight per speaker | 32 kg (70.5 lb) |
Why Choose the TAD Evolution Two?
The Evolution Two combines its paired cone woofers and beryllium dome tweeter in one floorstanding cabinet. Its bass-reflex enclosure and two crossover points define this model’s acoustic layout.
The included fittings support more than one placement arrangement. Spikes raise the stated cabinet height by 28 mm. The supplied feet and non-slip pads provide additional hardware for setting up the speaker.
FAQ
Can the TAD Evolution Two be used in a home hi-fi system?
- Yes. This passive floorstanding model is designed for a home hi-fi system and operates with an amplifier.
What should I check when choosing an amplifier for a home hi-fi setup?
- Check the speaker’s 6 Ω nominal impedance and 4.5 Ω minimum impedance. Its maximum input power is 150 W.
How many drivers are in one speaker?
- One cabinet contains two cone woofers and one beryllium dome tweeter. Their respective diameters are 15.5 cm and 2.5 cm.
How much space does one speaker need?
- Its cabinet measures 320 mm wide and 405 mm deep. Plan for a height of 1113 mm when using spikes.
What is included with the TAD Evolution Two?
- The package contains two sets of woofer grilles and two short cables. It also includes three spikes, three spike holders, two additional feet, four non-slip pads, two anti-tip spikes, and an instruction manual.
What are the speaker’s crossover frequencies and sensitivity?
- The crossover points are 90 Hz and 2.8 kHz. Sensitivity is 87 dB at 2.83 V, measured from 1 m.
With its electrical ratings, cabinet dimensions, and included placement hardware, the TAD Evolution Two offers the details needed to plan a home hi-fi installation.
